A complete Stage 1 Dual Nozzle System including 4 different nozzle sizes, Level Monitor, System Pressure Monitor and a 3.8L Reservoir with Bracket to allow for use on a range of platforms with varying modifications.
COOL BOOST SYSTEMS READY! STAGE 1 DUAL NOZZLE WATER METHANOL INJECTION KIT
This Cool Boost Systems Stage 1 Dual Nozzle Water-Methanol Injection System is designed for individuals requiring a dual point for injection with fluid delivery in a fixed manner.
This system includes a Stage 1 Display allowing the driver to be informed of system activation, low pressure faults and low levels during use.
This system is not suited specifically to a particular vehicle and is therefore Universal as includes a range of nozzles in various flow rates to allow for exchanging to reach optimal results on the intended platform.
This system also includes a Fluid Level and System Pressure monitoring unit for the detection and warning of low fluid levels and system pressure faults.
This Stage 1 Water-Methanol Injection Kit includes all the necessary hardware to allow for a complete system installation to your vehicle.
This system will activate based on a setpoint boost pressure which is adjustable between 0.4-1.2Bar
Key Features of the Cool Boost Ready! Stage 1 System:
*Simplistic and Easy to Monitor Injection
*Fluid Level Monitoring
*System Pressure Monitoring
*Leak Proof Components
*Easy to install
Quick Benefits Of Water-Methanol Injection
* Increase power output safely by 15-20%
* Lower air temperatures by 10-100°C degrees
* Increases octane by up to 25 RON and only when you need it in boost
* Reduces cylinder temperatures up to 150°C degrees
* Detonation and Pre-Ignition becomes a distant memory
* No wear issues only clean combustion chambers
* Allows you to safely run more boost and timing
What does WMI do to your vehicle's engine?
A Water-Methanol Injection Kit's main purpose is to suppress detonation caused by high temperature and pressure that has developed in the combustion chambers when the effective compression ratio has been taken beyond the auto-ignition point, by either a turbo, supercharger or high compression pistons (N/A).
Compressed air is heated air that causes a reduction of power and increases the likelihood of detonation.
Our kits help lessen any reduction of power while also increasing fuel economy by instantly cooling the compressed air in the boost pipes before the throttle body and also in the combustion chambers during ignition.
Because Water and Methanol both have a very high latent heat of evaporation, it is extremely effective for controlling not only the onset of detonation throw suppression but also the production of oxides of nitrogen in modern lean burning engines.
Methanol, with its 116 octane high flash point and specific gravity, helps further reduce the chances of detonation and acts as a fuel itself in the combustion chambers.
The kit contents of the Ready! Stage 1 Dual Nozzle Injection System
Fluid Delivery Components
1 x 3.8L Water Methanol Reservoir
1 x 3.8L Tank Mounting Bracket
1 x LeakProof Tank Outlet Fitting Straight with built in strainer
1 x LeakProof Pump Fitting - Swivel 90 Degree
1 x 20Bar 1500cc/min Alcohol Pump
1 x LeakProof Pump Fitting - Straight
6 x Meters Length of Blue 1/4" Nylon Piping
1 x Non Return Valve incl LeakProof Fittings
1 x 1/4" T-Piece
2 x LeakProof Side Feed Nozzle Holders
1 x CB1 Filtered High Atomising Nozzle
1 x CB3 Filtered High Atomising Nozzle
1 x CB5 Filtered High Atomising Nozzle
1 x CB7 Filtered High Atomising Nozzle
1 x Stage 1 V2 Display (Indications of Activation, Low Level and Low Pressure)
1 x System Pressure Monitoring Unit
1 x Reservoir Fluid Low Level Switch
1 x Adjustable Boost Pressure Switch (0.4-1.2bar)
1 x 5m Pre-Wired Easy install Wiring Harness with relay built in
2 x Round Terminal Lugs
1 x 1/8NPT Vacuum Barbed Fitting
1 x 4mm Vacuum T-Piece
3 x Meters of 3mm Vacuum Black Nylon Piping
6 x General Securing Cable Ties
4 x Vacuum Pipe Securing Cable Ties
1 x Roll of P.T.F.E. Thread Tape
1 x Roll of Cloth Tape
1 x Cool Boost Systems Lanyard
2 x Quarter Panel Window Stickers
* 2 Year warranty on all components *
* 24/7 365 System Back Up Support *
*** Please note: Kits, components, pricing and descriptions may vary as kits are constantly improving and upgrading, for most the accurate kit descriptions and pricing please make reference to: https://www.coolboostsystems.com (We try keep the site up to date at all times but there may sometimes be a small discrepancy) ***